ACCTON TECHNOLOGY CORPORATION
MULTI-FUNCTION ETHERNET+MODEM/FAX (EN2218-4)
| Card Type | Modem (synchronous/asynchronous), Ethernet |
| Chipset | Unidentified |
| Maximum Onboard Memory | 32KB DRAM/128KB Flash RAM |
| Network Transfer Rate | 10Mbps |
| Maximum Data Rate | 28.8Kbps |
| Maximum Fax Rate | 14.4Kbps |
| Data Bus | PCMCIA Type II |
| Fax Class | Class I |
| Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis, V.34 |
| Fax Modulation | ITU-T V.17, V.21CH2, V.27ter, V.29 |
| Error Correction/Compression | MNP5, MNP10, V.42, V.42bis |
| Topology | Linear Bus/Star |
| Wire Type | Unshielded
twisted pair RG-58A/U 50ohm coaxial |
| Boot ROM | Not available |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| MAU connector | CN1 |
Unshielded twisted pair connector | CN3 |
| RG-58A/U 50ohm coaxial connector | CN2 |
Telephone line out | CN4 |
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LINK |
Green |
On |
Network connection is good |
LINK |
Green |
Off |
Network connection is broken |
OH |
Green |
On |
Modem is off-hook |
OH |
Green |
Off |
Modem is on-hook |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
| +++, ‘comma’, A/ |
| A, B, C, D, E, H, I, M, N, O, P, Q, T, V, W, X, Y, Z |
| &C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X |
Extended AT Commands |
| \K, \N |
| %C, %E, %L, %Q |
S-Registers |
| S0, S6, S7, S8 |
Proprietary AT Command Set
See ACCTON TECHNOLOGY CORPORATION MULTI-FUNCTION ETHERNET+MODEM/FAX EN2218-2 for a full command summary.