| Card Type | Ethernet Transceiver |
| NIC Type | Ethernet |
| Boot ROM | Not available |
| Network Transfer Rate | 10Mbps |
| Topology | Linear Bus, Star, Ring, Peer-Peer |
| Wiring Type | Unshielded twisted pair Fiber optic cable |
| Data Bus | External |
| CONNECTIONS | |||
| Function | Label | Function | Label |
| RJ-45 UTP connector | CN1 | Fiber optic connector | CN3 |
| Fiber optic connector | CN2 | Power connector | CN4 |
| USER CONFIGURABLE SETTINGS | |||
| Function | Label | Position | |
| Pass-through connection selected | SW1 | In | |
| Crossover connection selected | SW1 | Out | |
| DIAGNOSTIC LED(S) | |||
| LED | Color | Status | Condition |
| LED1 | Yellow | Blinking | Data is being received |
| LED1 | Yellow | Off | Data is not being received |
| LED2 | Green | On | UTP network connection is good |
| LED2 | Green | Off | UTP network connection is broken |
| LED3 | Green | On | FiberAlert is enabled |
| LED3 | Green | Off | FiberAlert is disabled |
| LED4 | Green | On | Fiber optic network connection is good |
| LED4 | Green | Off | Fiber optic network connection is broken |