| Card Type | Ethernet Transceiver |
| NIC Type | Ethernet |
| Network Transfer Rate | 10Mbps |
| Topology | Star |
| Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
| Data Bus | External |
CONNECTIONS |
|||
Function |
Label |
Function |
Label |
| RJ-45 UTP connector | CN1 |
Power connector | CN3 |
| RG-58A/U connector | CN2 |
||
USER CONFIGURABLE SETTINGS |
|||
Function |
Label |
Position |
|
| Pass-through connection selected | SW1 |
In |
|
| Crossover connection selected | SW1 |
Out |
|
| » | Termination Enabled | SW2 |
On |
| Termination Disabled | SW2 |
Off |
|
DIAGNOSTIC LED(S) |
|||
LED |
Color |
Status |
Condition |
LED1 |
Yellow |
Blinking |
Data is being received on UTP port |
LED1 |
Yellow |
Off |
Data is not being received on UTP port |
LED2 |
Green |
On |
UTP network connection is good |
LED2 |
Green |
Off |
UTP network connection is broken |
LED3 |
Red |
Blinking |
BNC network connection is good |
LED3 |
Red |
Off |
BNC network connection is broken |
LED4 |
Yellow |
Blinking |
Data is being received on BNC port |
LED4 |
Yellow |
Off |
Data is not being received on BNC port |